Rola intinzatoare 1,BENATI 2201183,BERCO AT104,BERCO AT104A,DRESSER-FURUKAWA 3150009R93,FAI 820010018,HANOMAG 3227466M91,INGERSOLL RAND 57695751,ITM P2190400M00,JCB 208/34200,JCB 209/84700,LIEBHERR 508587914,LIEBHERR 5209148,RICHIER 508587914,SIMIT 45481186,SIMIT 71314449,VPI VAT104V,LIEBHERR,Excavator,R911HD,ALLIS-CHALMERS 084971,ALLIS-CHALMERS 70038234,ALLIS-CHALMERS 70084971,BERCO CR2491,BERCO CR4896,BERCO IN1286,CASE D43242,CASE R24578,CATERPILLAR 1B4432,CATERPILLAR 6S3419,DEMAG 414717,DRESSER 214442,DRESSER 3041382R1,DRESSER 616192C1,DYNAPAC 952715130,FUCHS 5382255220,ITM D0306000N17,JOHN DEERE T74184,LIEBHERR 7000785,LIEBHERR 7014228,POCLAIN-CASE POCLAIN S0134543,SAMSUNG-H.I. 9112-11801,SCHAEFF 5382255220,VOGELE 4610302107,VOLVO 13913181,VPI V6S3419,WIRTGEN 1860,WIRTGEN 6961,LIEBHERR,Excavators,R901B

How to clean the integral closed breather system

1000 series » How to clean the integral closed breather system

Caution: Do not use excessive force to remove the hose (A4) from the breather outlet pipe.

Note: The procedure below refers only to the closed breather shown in (A).

  1. Release the hose clip and carefully remove the hose from the breather outlet.
  2. Remove the rocker cover.
  3. Caution: Ensure that the lever does not damage the cover.

  4. Release the fasteners and carefully remove the breather cover from the breather body. A suitable lever may be necessary to release the cover from the body of the breather. Ensure that the lever does not damage the cover. Discard the joint (A5).
  5. Caution: Do not clean the breather valve or the gauze filter. The breather valve (A1) and the gauze (A3) must be renewed every 4000 hours.

  6. Release the clips (A2) from the clip retainers (A7) and push the breather valve out of the breather cover.Discard the breather valve.
  7. Remove and discard the gauze.
  8. Warning! Do not allow compressed air to contact your skin. If compressed air enters your skin, obtain medical help immediately.

  9. Wash the body of the breather, the cover, the baffle plates (A6) and the breather pipe, every 2000 hours of operation. Use an approved kerosene cleaning fluid and dry them with compressed air at low pressure.
  10. Ensure that the holes at the bottom of the baffle plates in the breather body are not restricted. If necessary, clean the holes.

To assemble

  1. Fit the baffle plates into the grooves in the breather body.
  2. Renew and fit the gauze filter into the breather body.
  3. Renew and fit the new valve into the breather cover. Ensure that the clips are engaged correctly.
  4. Note: The breather valve is renewed every 4000 hours.

  5. Renew the joint, which is fitted dry. Put the cover and valve assembly into position on the breather body. Loosely fit the fasteners. Tighten the fasteners gradually and evenly to 3 Nm (2.2 lbf ft) 0.3 kgf m.
  6. Caution: Do not use excessive force to fit the hose to the breather outlet pipe.

  7. Check that there is no restriction in the breather pipe or the breather hose. Fit the breather hose to the cover and tighten the clip.
Inapoi Seria motor Perkins 1000 series
Sistemul de ghidare 3Dxi este cea mai avansata solutie pentru controlul excavatoarelor. Cu ajutorul lui utilajul poate lucra mai rapid, cu precizie centimetrica - folosind proiectul digital incarcat in panoul de control al sistemului. Sistemul este compus din senzori de inclinatie si echipament GPS-RTK, care determina
mai multe detalii ...
ITM D0306000N17, JCB 208/34200, LIEBHERR 7000785, FUCHS 5382255220, BENATI 2201183, DRESSER 214442, DEMAG 414717, VPI VAT104V, Rola intinzatoare 1, SAMSUNG-H.I. 9112-11801, SCHAEFF 5382255220, Excavator, INGERSOLL RAND 57695751, WIRTGEN 1860, DRESSER 616192C1, FAI 820010018, LIEBHERR, R911HD, WIRTGEN 6961, BERCO CR2491, LIEBHERR 7014228, VPI V6S3419, ALLIS-CHALMERS 70038234, JOHN DEERE T74184, DRESSER-FURUKAWA 3150009R93, CATERPILLAR 1B4432, BERCO IN1286, JCB 209/84700, ALLIS-CHALMERS 70084971, HANOMAG 3227466M91, RICHIER 508587914, BERCO AT104, CATERPILLAR 6S3419, BERCO CR4896, POCLAIN-CASE POCLAIN S0134543, SIMIT 71314449, SIMIT 45481186, DRESSER 3041382R1, VOGELE 4610302107, LIEBHERR, BERCO AT104A, R901B, LIEBHERR 508587914, Excavators, CASE R24578, VOLVO 13913181, DYNAPAC 952715130, LIEBHERR 5209148, CASE D43242, ITM P2190400M00, ALLIS-CHALMERS 084971
Noul Komatsu D65-17 a sosit pe piata europeana in 2011. Este primul buldozer al marcii japoneze care raspunde exigentelor stricte ale normei Tier 4. Utilajul de constructii dispune de toate inovatiile marcii: o lama Sigmadozer, un sistem de orientare prin satelit, un sistem de transmisie de ultima generatie... Rezisten
mai multe detalii ...
Excavator, BERCO AT104A, Excavators, CASE D43242, FUCHS 5382255220, SIMIT 45481186, VOLVO 13913181, SAMSUNG-H.I. 9112-11801, ITM P2190400M00, R901B, CASE R24578, BERCO CR2491, BERCO AT104, CATERPILLAR 1B4432, WIRTGEN 1860, ITM D0306000N17, Rola intinzatoare 1, FAI 820010018, BENATI 2201183, LIEBHERR 508587914, LIEBHERR, JCB 209/84700, LIEBHERR 7014228, RICHIER 508587914, SCHAEFF 5382255220, DRESSER 616192C1, DRESSER 214442, LIEBHERR 7000785, WIRTGEN 6961, VOGELE 4610302107, BERCO IN1286, DRESSER-FURUKAWA 3150009R93, VPI VAT104V, INGERSOLL RAND 57695751, ALLIS-CHALMERS 70038234, JOHN DEERE T74184, DRESSER 3041382R1, JCB 208/34200, POCLAIN-CASE POCLAIN S0134543, ALLIS-CHALMERS 084971, LIEBHERR, LIEBHERR 5209148, DEMAG 414717, HANOMAG 3227466M91, SIMIT 71314449, R911HD, VPI V6S3419, ALLIS-CHALMERS 70084971, BERCO CR4896, CATERPILLAR 6S3419, DYNAPAC 952715130

Sediu : 700045 Iasi, Strada Sfantul Lazar nr. 27, Kapital Invest Building -  etajul 2
Depozit :
700382 Iasi,Str. Aurel Vlaicu 88
600343 Bacau,Str. Letea 32
062202 Bucuresti, Str. Preciziei 32
2059 Chisinau, Str. Petricani 19/4

Societate aflata in insolventa prin hotararea Tribunalului Iasi din 21 martie 2025, dosar nr. 1116/99/2025

Telefon Romania:

+40 743 122 261
office@commatech.ro