1000 series » How to renew the filter canister of the canister fuel filter

Thoroughly clean the outside surfaces of the fuel filter assembly.
Loosen the drain device at the bottom of the filter (A1) and allow the water/fuel to drain into a suitable container.
Use a strap wrench or similar tool to loosen the filter canister and remove the canister.
Ensure that the threaded adaptor (A2) is secure in the filter head and that the inside of the head is clean.
Lubricate lightly the top seals (A3) of the new canister with clean fuel. Fit the new canister to the filter head and tighten, by hand only.
Eliminate the air from the fuel system.

Inapoi

Seria motor Perkins 1000 series

Stivuitorul TELESCOPIC JCB 550-80 va fi ideal pe santiere sau in industrie. Acest stivuitor de santier permite manipularea unor incarcaturi de 5 tone. La inaltimea sa maxima, putin mai mult de 8 metri, poate ridica pana la 2,5 tone. Noul stivuitor de santier TELESCOPIC 550-80 de la JCB este echipat cu un sis

mai multe detalii ...

ATLAS COPCO, hydraulic hammer, Bush, TEX 600 H, spare parts

KOMATSU a prezentat la Intermat 2015 noul incarcator pe pneuri WA270-7, care inlocuieste modelul WA250PZ-6.Cu noua motorizare SAA6D107E-2, incarcatorul realizeaza o economie de consum de 10% in raport cu modelul precedent, totodata aducand un plus de putere si un confort sporit de utilizare, dezvoltand o putere neta de

mai multe detalii ...

spare parts, ATLAS COPCO, TEX 600 H, hydraulic hammer, Bush

Sediu : 700045 Iasi, Strada Sfantul Lazar nr. 27, Kapital Invest Building - etajul 2
Depozit :
700382 Iasi,Str. Aurel Vlaicu 88
600343 Bacau,Str. Letea 32
062202 Bucuresti, Str. Preciziei 32
2059 Chisinau, Str. Petricani 19/4

Societate aflata in insolventa prin hotararea Tribunalului Iasi din 21 martie 2025, dosar nr. 1116/99/2025

Telefon Romania:

+40 743 122 261
office@commatech.ro

hydraulic hammer, ATLAS COPCO, Bush, TEX 600 H, spare parts

Produse

1000 series » How to renew the filter canister of the canister fuel filter