Senile Otel,HYUNDAI,Excavator,R210LC-7A,BERCO KM3807/49,BERCO KM782/49,BERCO LH1075/49,CATERPILLAR 931963,CATERPILLAR 990046,DAEWOO 200103-00096A,DAEWOO 2272-6101,DAEWOO 272-00054,DOOSAN K1011228,DRESSER-FURUKAWA 3380411H91,EURODAEWOO 9272-6018,HITACHI 9202850,HYUNDAI 81EM-27010,HYUNDAI 81N6-26600,ITM E15698B1M00049,ITM E40208C0M00049,JOHN DEERE AT152088,KOMATSU 20Y-32-00023,KOMATSU 20Y-32-00024,KOMATSU 20Y-32-K1511,SAMSUNG-H.I. 1082-02170,SAMSUNG-H.I. 1182-00010,SAMSUNG-H.I. 1182-00011,VOLVO 14530361,VPI VKM782/49HDV,HYUNDAI,Excavators,R220LC-7

3.152 Series » How to check the tappet clearances

These are checked between the top of the tappet and the rocker lever (A1). For D3.152 engines the correct clearances are 0.30 mm (0.012 in) for inlet and exhaust valves with the engine cold. For 3.1524 and T3.1524 engines the correct clearances are 0.20 mm (0.008 in) for the inlet valves and 0.32 mm (0.0125 in) for the exhaust valves with the engine hot or cold.

Caution: Number 1 cylinder is ai the front of the engine.

Turn the crankshaft in the normal direction of rotation until the inlet valve of number 1 cylinder has just opened and the exhaust valve of the same cylinder has not closed completely. Check the clearances of valves numbers 4 and 6 and adjust them, tf it is necessary.

Make a mark on the crankshaft pulley and timing case cover and turn the crankshaft one complete revolution (360°) until the marks align again. Check and adjust clearances of numbers 1, 2, 3 and 5 valves.

Lansat in anul 2013, excavatorul Liebherr R926, inlocuind astfel modelul R924.Noul model R926 are o greutate de 25 tone si este echipat cu un motor diesel care genereaza o putere de 120kW si 163CP respectand normele de emisii ale fazei IIIB. Ca optiune suplimentara, acest model poate fi echipat cu filtru de parti

mai multe detalii ...

DRESSER-FURUKAWA 3380411H91, KOMATSU 20Y-32-00024, VOLVO 14530361, HYUNDAI, DAEWOO 200103-00096A, ITM E40208C0M00049, R210LC-7A, KOMATSU 20Y-32-K1511, R220LC-7, CATERPILLAR 990046, SAMSUNG-H.I. 1182-00011, Excavator, BERCO KM3807/49, EURODAEWOO 9272-6018, BERCO KM782/49, VPI VKM782/49HDV, HYUNDAI, HYUNDAI 81N6-26600, Excavators, HYUNDAI 81EM-27010, KOMATSU 20Y-32-00023, BERCO LH1075/49, HITACHI 9202850, CATERPILLAR 931963, DAEWOO 272-00054, Senile Otel, JOHN DEERE AT152088, ITM E15698B1M00049, SAMSUNG-H.I. 1082-02170, SAMSUNG-H.I. 1182-00010, DOOSAN K1011228, DAEWOO 2272-6101

În ultimii 50 de ani majoritatea lucrărilor de excavare în rocă si demolări au fost realizate utilizând ciocane hidraulice clasice. Tot în acesti 50 de ani producătorii de echipamente pentru demolări si-au concentrat eforturile în vederea cresterii eficientei si productivitătii cioca

mai multe detalii ...

KOMATSU 20Y-32-00023, EURODAEWOO 9272-6018, BERCO KM782/49, DAEWOO 272-00054, BERCO LH1075/49, SAMSUNG-H.I. 1182-00010, SAMSUNG-H.I. 1182-00011, HYUNDAI, HYUNDAI, Excavators, DOOSAN K1011228, DAEWOO 200103-00096A, ITM E15698B1M00049, CATERPILLAR 990046, KOMATSU 20Y-32-00024, DRESSER-FURUKAWA 3380411H91, VPI VKM782/49HDV, VOLVO 14530361, Excavator, KOMATSU 20Y-32-K1511, R210LC-7A, DAEWOO 2272-6101, CATERPILLAR 931963, JOHN DEERE AT152088, BERCO KM3807/49, HYUNDAI 81EM-27010, HITACHI 9202850, ITM E40208C0M00049, HYUNDAI 81N6-26600, R220LC-7, Senile Otel, SAMSUNG-H.I. 1082-02170

Produse

3.152 Series » How to check the tappet clearances